SpeedFun Standard Container lid for Fazua Ride 50

Only suitable for SpeedFun Furious Evo Chip for Fazua Ride 50

This cover was specifically designed by SpeedFun to accommodate the RJ container and at the same time protect against splashing water caused by the rotation of the wheel in the area of the Fazua motor "connectors".

Due to the very small space available, this special cover was created, which thanks to its shape will facilitate installation, giving you more space and not having to remove the engine to insert the device into the frame.

Manufacturer: SpeedFun, Made in ITALY

WARNING

Operating an electric bicycle equipped with a chip to remove the speed limit may be illegal in some countries. An electric bicycle equipped with a Chip loses the status of a bicycle according to EN15194:2017, therefore its operation may not be in accordance with the applicable legislation for the operation of electric bicycles on roads (including roads intended exclusively for cyclists and pedestrians). Installing the Chip may result in the loss of the warranty on the drive or bicycle. The manufacturer or seller is not liable for any damage to health or life or property. Use at your own risk.

LIFETIME WARRANTY

It covers the functionality and compatibility of the chip on the current and previous firmware of the drive at the time of sale . The warranty does not cover the inoperability of the chip after a later update of the drive, with which the chip may no longer be compatible!

WARNING BEFORE UPDATING

Before visiting the service center, it is necessary to physically remove the Chip from the drive! The Chip manufacturer does not recommend updating the drive. If using a mobile application (e.g. Ebike flow), turn off automatic updates. If it is not necessary, please always consider updating the drive. Each update contains improved anti-tuning software, which can detect and disable the Chip or temporarily block the drive (Emergency mode / Limbo mode). In such a case, we recommend removing the Chip and checking the functionality of the drive.
If the drive works without removing the Chip (i.e. the Chip is defective), contact us with an exact description of the bike and the situation.
If the problem persists (i.e. the drive itself is defective, not the Chip), please visit your bicycle dealer.