VOLspeed for Giant Syncdrive Pro2 / Sport2 V4 Speed Tuning Chip

- removes the 25km/h software speed limit , does not increase performance or interfere with drive functions or individual modes

- installation by end customers, without the need for diagnostics, a computer, a mobile phone, etc.

Weight: 25g

Tuning module for fixed installation in e-bikes with Giant Syncdrive Pro 2 and Syncdrive Sport 2 drive system from model year 2022 with the displays Ridedash Plus, Ridedash Plus 2, Ridedash Evo or Ridedash 2 in 1 , as well as the GO+, Ergo, Ergo 2 or Ergo 3 control unit. For bikes with other Giant drive systems, please refer to the following selection guide.

COMPATIBILITY WARNING:
Not compatible with Smart Gateway software version 20240314000 or newer. Do not carry out any software updates to the drive system. This could impair the function of the tuning and/or the bike. Do not use the Ride Control app either, as this app could force you to update the software. Further information can be found here

Technical Data

• Housing dimensions: 37mm x 19mm x 9mm (1.46” x 0.75” x 0.36”)
• Cable length: Approx. 140mm (5.5”)
• Weight: 0.025kg (0.9oz)
• Power consumption: 0.1W
• Supply voltage: 5VDC
• WEEE Reg. No. DE35476192

Manufacturer: TLI Elektronik GmbH, Made in Germany, CE certificate

WARNING

Operating an electric bicycle equipped with a speed limit removal chip may be illegal in some countries. An electric bicycle equipped with a Chip loses its status as a bicycle within the meaning of EN15194:2017, therefore its operation may not be in accordance with the applicable legislation for the operation of electric bicycles on land roads (including land roads). intended exclusively for cyclists and pedestrians). Installing the Chip may result in loss of warranty for the drive or bicycle. The manufacturer or seller is not liable for any resulting damage to health or life or property. Use at your own risk.

LIFETIME WARRANTY

It covers the functionality and compatibility of the chip on the current and previous firmware of the drive at the time of sale . The warranty does not cover the inoperability of the chip after a later update of the drive, with which the chip may no longer be compatible!

WARNING: Before visiting the service center, it is necessary to physically remove the Chip from the drive! The chip manufacturer does not recommend updating the drive. Turn off automatic updates in the Ebike flow settings. If this is not necessary, please always consider updating the drive. Each update contains improved anti-tuning software that can detect the Chip and disable the Chip or drive. When the Chip is detected, the drive may switch to emergency mode (Limbo mode) or the drive may be blocked. Please contact us with an exact description of the bike and the situation. In case of other error codes, please visit your bike dealer)